Elevator Belt

Goodlark Elevator Bucket Belts Systems
Elevator Belt /
Flat Belt /
PVC Elevator Belt /

Goodlark Elevator Belt
It’s a high performance belt which is suitable for grain handling industry. The carcass is a kind of rubber dipped synthetic fabric bearing low stretched polyester warp nylon weft. The cover rubber is static conductive, the surface resistance meets standard OSHA; Fire retardance meets MSHA regulations; Oil resistance belt is used to handle oily material.
Specification:

The carcass is a kind of rubber dipped synthetic fabric bearing low stretched polyester warp nylon weft. Adding a wear resistant fabric on the side which the belt contact with the elevator pulley which works as the interface between the elevator pulley.

Features:
1.Low extensibility, high t tensile strength, oil resistant, suitable for moderate oily material.
2.The reformed structure that adding a wear resistant fabric on the side which the belt contact with the elevator pulley can improve the transmission efficiency of the elevators, enhance the fastener retention prevent the bolt from pulling through the belt., to ensure the tight join of bucket belt.
3.No cover rubber splitting caused by frequent contact with the pulley.
4.More cost effective than the traditional rubber elevator belt.
Remark：Drilling can be made according to customers’ demand.

Technical Data:

Goodlark Flat Belt

Features:
1.Innovative design, adopting advance rubber compound with good adhesion at opposite joint of surface fabric with fillet, delaminating will not occur during operation.
2.Adopting high quality pure cotton canvass, the duck plies have good enduration will not easily deform.

Technical Data Sheet:

Goodlark PVC Elevator Belt
The solid woven carcass is generally woven with Terylene cotton. Synthetic binder yarns follow a complex pattern to give the carcass its solid woven properties. Impregnating PVC paste resin pressed by both sides to get the PVC cover. (one side is smooth cover, the other side that touches with pulley is friction cover). It’s fire retardant anti-static.

Features：
1.Multiply inter-woven carcass keeps synchronous in the course of weaving, impregation, plasticization paste. The structure is stressed in balance. The dipping elastomer could bind all the yarn, composing a close-grained flexible carcass. No excessed pulling compression. Keep a good running trail not easy to off track.
2.Compared to the rubber elevator belt, it’s uniformly stressed to ensure the strong elevating capability. No peeling off both on the cover rubber between ply ply with superior tear resistance.
3.Good bolt retention makes a strong joint between the bucket belt.
4.With better properties such as resistance to oils, chemicals, dump swear compared to the rubber elevator belt.
5.Light weight, strong structure low driving power. With superior anti-extensibility lower extension rate compared to the rubber elevator belt.
6.It applies to big bucket of big load big size.
7.PVC elevator belt is suitable for the buckets with big burden with a wide projection.

Specifications Performance Parameter

Performance of Cover Rubber

Thank You for Choosing Goodlark Elevator Conveyor Belt